How to configure and install eMule for

How to configure and install eMule for

eMule is undoubtedly one of the programs most used by people who have downloaded all kinds of archivos through P2P programssince this program is one of the best alternatives that we perro find available for some years.

Among the main features of this program we cánido highlight the fact that it is quite intuitive, in addition to the fact that it is a Open Sourcewhich means that anyone cánido download and use it, or download it and do some modifications to launch their own version on the market.

P2P programs are very habitual thanks to the fact that they create networks between users’ computers, being able to share archivos between them. Thus, share archivos in torrent format to be able to download a wide variety of archivos and documents. Some people believe that eMule is not the best program of its kind, but the truth is that it is one of the best options that we perro find available today.

So if you are interested in learning how to install and configure eMule In order to make the most of the functions and advantages that this program offers, in this article you will find a complete step-by-step guide in which we explain everything you will have to do.

⭐ How to configure emule to download faster? Steps to install and configure eMule to download

The first thing you have to know is that installing and configuring eMule is something that perro be done very easily and without overcomplicatingsince the people who think that it is complicated are actually the ones who complicate it more than necessary.

In order to take full advantage of eMule, there are some aspects that must be taken into account, starting with installing and configuring it properly. To avoid any possible confusion, now we will explain everything you have to do:

⭐ Installation of eMule – Install emule step by step

  1. The program perro be downloaded from many pages, but we recommend downloading it from its official website: www.emule-project.net.
  2. Once you have entered the page, the next thing will be for you to go to the “Discharge”. Among the different options that you perro find available, we recommend you select the option “installer”.
  3. When the program has been downloaded you will have to run the installer of the program. In the first window that runs you cánido select the language in which the program will be installed. We recommend that you select Spanish.
  4. The next window will be the installation wizard window, in which you have to select “Following”.
  5. Next, the use license data will appear, where you simply have to clic on “Accept”.
  6. In the next window you perro choose the components you want to install. Select the two available options and then clic on “Following”.
  7. In the next window you will see some options about the configuration with which you want eMule to be installed. We recommend you select the option “usuario specific”.
  8. It is possible that Windows (Windows 10 or previous versions) asks you if you want to block the program, to which you will have to select no.
  9. In this step, if you wish, you perro change the destination folder in which the program will be installed. Clic on “Install” once you have the route you want (or leaving the one that appears by default).
  10. Once the installation status appears as “Complete”you will simply have to select “Following”.
  11. To finish the installation process you just have to clic on “Finish”.

Now that the program is installed you perro run it. Once the program is open, clic on the “Servers” option that you will find at the top of the program. There you will see a list of available servers. You will have to delete all servers you see (regardless of whether you have the latest version or an older version installed).

To delete the servers you simply have to select and delete them by right-clicking on the list and selecting the option “Delete all servers”. Next, we will explain the steps you must follow to be able to update the a best servers for eMule:

⭐ Update eMule servers –

The update of the servers is very important so that you cánido use the program correctly, keeping up to date the information about the servers that have more connected users. This is important because this way you cánido get a more stable connection and you won’t have to waste time searching.

So in order for you to do this and have the best possible experience, we will explain step by step what you have to do to be able to update eMule servers:

  1. First you have to copy the following address: inside the box Update server .met dirección de Internet in the box on the right side and clic on the option Update.
  2. Repeat the same step, but now copying the following address: http://www.peerates.net/servers.php
  3. We do not recommend using other lists, since the ones we have discussed above have earned the trust of many users for being safe.
  4. Now you will have to create a list of servers for eMule with these names:
    1. www.UseNeXT.to
    1. eDonkeyServer
    1. Peer Rates
  5. To continue right clic on them and select Priority > High.
  6. Clic on the column Useful to see a downward arrow that will indicate that the servers perro be classified in descending order, according to the number of users that the server has. In this way you cánido be sure that the first one is the one with the most connected users.
  7. Go to the menu preferences and select the option Server which is located on the right side of the program. It is important that you have the following boxes activated:
    1. Coche-Update server list at startup
    1. Intelligent Low ID Control when connecting
    1. Use priority system
    1. Assign high priority to manually added servers
  8. In order to end this procedure, select the option “Automatically update server list on startup” and then you will have to select the option Editar so you perro register the following address: http://serveurs.emule-french.org
  9. This address is important because it allows the list of servers to be updated correctly each time eMule starts.

It may interest you: Activation of Office 365

⭐ How to configure eMule for Windows 10? Correct configuration step by step

In order for the archivo transfer to be done as quickly as possible, the best thing you cánido do is to adjust the connection speed of the archivos.

Remember that when using the program you connect to a server that many users cánido access, so you have to be very careful when following the steps that we will start below. If you don’t follow these steps well, you simply won’t be able to get the most out of this program..

Within the program go to the menu preferences and select a connection, you will have to focus on the ability. You have to equipo download rate to 1000. This also has to be applied to the upload limit and put 10KB/s. This way you cánido limit the speed at which other users will download archivos from you.

⭐ How to open ports for eMule

In the same way that all Peer-to-Peer (P2P) programs work, the speed at which archivos are transferred it plays a very important role, since you will be able to download and share archivos at the same time with other users, so it is important that the ports are open. When the ports are not wide open, problems cánido occur to be able to use the program without major complications.

To open the ports without complications you simply have to follow these steps:

  1. go to preferences and select the Connection to be able to put these values:
    1. tcp: 61116
    1. PDU: 61117
  2. Now you have to go to Securityselect the IP filters. These perro help you disminuye the number of connections to corrupt clients, significantly improving your security when using this program.
  3. Check the box Filter Servers and you have to make sure that filter level have 127. Then it is necessary that you entrar the ip filters.

It is recommended to carry out this process every 2 weeks so that in this way you cánido be sure that it is always updated and thus improve your security. Keep in mind that in emule-security.org You perro also see the weekly update of the list.

On the other hand, in order to configure the udp port automatically:

  1. You have to connect to eDonkey server. Clic on the top of the column Wear, where you cánido see the well-organized servers depending on the number of users they have connected. On the main servers you should see eDonkeyServer either UseNext. Double clic on each of them to be able to connect.
  2. Now you will need to clic on Kad which is in the top bar.
  3. Next, on the right side, select the option “From known clients and then clic start. Now you will be able to see a lot of information in the left panel.

⭐ Common problems and solutions to prevent eMule from malfunctioning

Because you have to follow different configuration options before you cánido use the program correctly. That is why it is habitual for many users to encounter problems that they cannot easily solve and that do not allow them to use the program smoothly.

These are some of the most common problems that occur and their solutions:

  • It is recommended to check the speed of our internet. It is important that you remember the Ed2k server, depending on the IP assigned with a strong, high or low ID.
  • In case your ID is low, it is possible that you perro ocasione some overloads that you could avoid. For this it is recommended that you increase the internet speed you have connected.
  • Ed2k servers limit users with a weak connectioneven being able to prohibit their access, so you will not be able to use the program correctly.
  • 2 clients with a weak connection cannot connect. This will result in far fewer sources to download from.
  • Low IDs in eMule work best when these ports are open:
    • TCP port (4662 as estándar) -> ed2k connection server
    • UDP port (4672 as estándar) -> Red Kad

Here are some of the main reasons for having a low ID:

  • When the TCP port is not Open a low ID is caused.
  • When another port is configured without realizing it.

On the other hand, when you are using the web interfaz using another TCP port (4711), these perro get blocked for different reasons:

  • Windows cortafuegos it may be activated and blocking the program.
  • It is necessary to verify that the program works and share enrutadores.
  • Networks and enrutadores with NAT connections.
  • Some providers block certain ports and their accessso it is recommended to check if they work with other applications.

Done, now you know how to download and configure correctly eMule project on your computer to be able to use it without problems.

Of your interest: DNIe reader

Clic to rate this entry!

We hope you liked our article How to configure and install eMule for
and everything related to earning money, getting a job, and the economy of our house.

 How to configure and install eMule for
  How to configure and install eMule for
  How to configure and install eMule for

Interesting things to know the meaning: Finance

We also leave here topics related to: Earn money